3.9. VGA / Video
The VGA monitor is uses the PIC32 SPI to generate the video signal.
VGA.HSYNC is generated by RD4, VGA.VSYNC is generated by RB12 which is also connected to
LED2 (YELLOW) and ARDUINO.D9.
VGA R/G/B signals are connected together via small SMD jumpers if you selectively cut them you can
make your Video output RED, GREEN, BLUE, AMBER or YELLOW in color.
PIC32 RG8, RG9 generates the Video signal.
Composite video signal is also generated if VGA monitor is not detected. The composite video is
output to the VIDEO RCA connector. PAL, SECAM, NTSC modes are supported, note that in
Composite Video mode the screen resolution is lower than VGA mode.
Summary of Contents for DuinoMite
Page 27: ...4 SOFTWARE...
