background image

Connecting the Broadband Wireless Router (AP) 

1 Connecting to the WAN port. 

Connect the Ethernet cable with your xDSL/ATU-R to the 10Base-T Ethernet WAN 

port on your Broadband Wireless Router (AP). 

Note:

 

1.  The attached xDSL/ATU-R must provide a standard 10Base-T Ethernet connection. 

Please use the Ethernet cable provided by your ISP or any other standard 10Base-T 

Ethernet cable. 

2.  The Ethernet cable supplied by your ISP for connecting to your xDSL/ATU-R may be 

an Ethernet crossover cable or a straight-through cable. It is important to use the cable 

provided by your ISP to connect the modem to your Broadband Wireless Router (AP). 

 

2 Connecting to the LAN port L1/L2/L3/L4. 

Attach one end of the Ethernet cable with RJ-45 connector to the AV port of your 

Broadband Wireless Router (AP).   

The Broadband Wireless Router (AP) incorporates a four-port switch for connection 

to your local Ethernet network. The Ethernet ports are capable of operation at either 

10Mbps (10Base-T) or 100Mbps (100Base-Tx), depending on the Ethernet interface 

of the attached PC, hub or switch. For any connection which will operate at 100 Mbps, 

you must use a category 5 rated cable, such as the Ethernet cable included with the 

Broadband Wireless Router (AP). 

 

3 Preparing your wireless station. 

You need to check the setting of wireless client stations to match the default settings 

of the Broadband Wireless Router (AP): 

1.  The default SSID: 

IEEE 802.11 LAN

2.  WEP encryption is 

disabled

. Authentication Type is 

Open Key 

(or 

Open 

System 

according to your Wireless LAN Card). 

3. Use 

Infrastructure

 connection mode. 

 

4 Connecting the power adapter . 

Connect the supplied power adapter to the 

12VDC 

port of your Broadband Wireless 

Router (AP), and the other end to a power outlet. 

Summary of Contents for Broadband Wireless Router None






Reviews: