OLI Sport, Installation, Use And Maintenance Manual

Page: 38 / 44

03_OLI_00_IT_EN
37
USE AND MAINTENANCE MANUAL 3
SPORT
The following table lists the possible faults and the 4-character codes displayed in the error
messages.
Error code Description
0001 Communication problem with the battery. It is possible that
the battery status data is displayed incorrectly.
Check that the wiring and the battery contacts are correctly
connected and intact.
0101 Communication problem between drive unit and HMI.
Check that the wiring is correctly connected and intact.
0104 Speed sensor not detected.
Check that the alignment between the magnet and the
speed sensor is correct.
Check that the speed sensor is installed and connected
correctly.
0105 Torque meter signal not compliant.
The torque meter signal has a fault. Low power operation.
0106 Torque meter offset not compliant.
The torque meter signal has a fault.
0801 Faults in the motor rotation sensors.
0802 Faults in the pedals rotation sensors.
0804 Excessive controller temperature.
The temperature sensor inside the controller has detected
a temperature above the danger threshold.
0805 Excessive motor temperature. The motor has reached a
temperature above the danger threshold.
0806 Peripheral bus voltage not compliant.
0808 Locked rotor. The motor failed to start due to a mechanical
blockage or a problem with the internal wiring of the drive
unit.
0809 The battery voltage is above the maximum voltage allowed.