Oleo-Mac BC 22 TR, Operator'S Instruction Manual, Page: 7 / 20

5
2. SYMBOLS AND SAFETY WARNINGS (Fig.25)
1 - Read operator’s instruction book before
operating this machine.
2 - Wear head, eye and ear protection.
3 - Wear strong boots and gloves when cutting
with metal or plastic blades.
4 - Be aware that objects can be thrown.
5 - Keep bystanders away 15 m.
6 - Warning! Kickback it’s danger.
7 - On machines with a bent drive shaft it is not
possible to fit disks, only line heads.
8 - Type of machine: BRUSH CUTTER .
9 - Guaranteed sound power level.
10 - CE conformity marking.
11 - Serial number.
12 - Year of manufacture.
13 - Max. speed of output shaft, RPM
3. MAIN COMPONENTS (Fig.1)
5 - Bevel gear
6 - Curved guard
7 - Nylon line head
8 - Fuel tank cap
9 - Purge Bulb
10 - Carburettor adjustment screws
11 - Muffler guard
12 - Spark plug
13 - Air filter
14 - Starter Handle
15 - Choke Lever
16 - Throttle trigger lockout
17 - STOP button
18 - Throttle lever
19 - Harness attachment
20 - Handle
21 - Shaft arm
4. ASSEMBLY
Loop handle (Fig.2)
Loosen the wing nut (A), rotate the loop handle
(B) of 180° and secure it.
The handle position is calculated depending on
the requirements of the operator.
5. STARTING
FUELING
WARNING: Gasoline is an extremely
flammable fuel. Use extreme caution when
handling gasoline or fuel mix. Do not smoke
or bring any fire or flame near the fuel or the
unit.
· To reduce the risk of fire and burn injury,
handle fuel with care. It is highly flammable.
·
Mix and store fuel in a container approved for
gasoline.
·
Mix fuel outdoors where there are no sparks or
flames.
· Select bare ground, stop engine, and allow to
cool before refueling.
· Loosen fuel cap slowly to release pressure and
to keep fuel from escaping around the cap.
· Tighten fuel cap securely after refueling. Unit
vibration can cause an improperly tightened
fuel cap to loosen or come off and spill
quantities of fuel.
· Wipe spilled fuel from the unit. Move 3 metre
away from refueling site before starting
engine.
· Never attempt to burn off spilled fuel under
any circumstances.
· Do not smoke while handling fuel or while
operating the unit.
· Store fuel in a cool, dry, well ventilated place.
·
Never place the machine in a combustible
area such as dry leaves, straw, paper, etc.
·
Store the unit and fuel in an area where fuel
vapors cannot reach sparks or open flames
from water heaters, electric motors or
switches, furnaces, etc.
· Never take the cap off the tank when the
engine is running.
· Never use fuel for cleaning operations.
·
Take care not to get fuel on your clothing