Oleo-Mac BC 22 TR, Operator'S Instruction Manual, Page: 6 / 20

4
in good conditions. In case of damage or
deterioration, immediately substitute them
(Fig. 18).
15 - Do not utilize the machine for uses
different from the ones specified in the
manual (see pag. 8).
16 - Never leave the machine unattended with
the engine running.
17 - Do not start the engine with the arm not
mounted.
18 - Check the brush cutter daily to be sure that
components and safety devices are full
functioning properly.
19 - Do not attempt to carry out operations
or repairs that are not part of the normal
maintenance. See the authorised dealer.
20 - When disposing of the machine at the end
of its useful life, think of the environment.
Take your old unit to your dealer who will
be able to dispose of it in a proper manner.
21 - Only experienced persons who are familiar
with the operation and safe use of this
machine should use it. If you lend the
machine to someone, also give them the
instruction manual and ensure that they
read it before using the machine.
22 - All saw service, other than the operations
shown in the present manual, should be
performed by competent personnel.
23 - Keep this manual on hand and consult it
before each use of the tool.
WARNING
-
Never use a machine with faulty safety
e q u i p m e n t . T h e m a c h i n e ’ s s a f e t y
e q u i p m e n t m u s t b e c h e c k e d a n d
maintained as described in this section. If
your machine fails any of these checks
contact an Authorised Service Centre to
get it repaired.
-
Any use of the machine not expressly
envisaged in this manual is to be
considered improper and therefore a
source of risk to people and property.
WARNING: National regulations may limit
the use of the machine.
1 - Do not operate the machine unless you
have received specific instruction on its use.
First time users must familiarise themselves
thoroughly with the operation of the machine
before working in the field.
2 - The machine must only be used by adults
in good physical condition who are familiar
with the operating instructions.
3 - Never use the brush cutter when you are
tired or fatigued or if you have taken alcohol,
drugs or medication.
4 - Wear appropriate clothing and safety articles
such as: boots, heavy-duty trousers, gloves,
protective eyewear, ear protection and
protective helmet. Use clothing which is
close-fitting but comfortable.
5 - Do not allow children to use the brush cutter.
6 - Do not allow other people to remain within
15 metres during brush cutter use .
7 - The brush cutter must be equipped with the
cutting accessories recommended by the
manufacturer (look pag. 14).
8 - Never use the brush cutter without the head
guard.
9 - Before starting the engine, make sure that
the blade is free to move and is not in contact
with any foreign objects.
10 - Only use the machine in well-ventilated
places, do not use in explosive or flammable
atmospheres or in closed environments.
11 - Never attempt any maintenance work while
the engine is running.
12 - It is prohibited to fit any device other than
that supplied by the manufacturer.
13 - Do not use a machine that has been damaged,
badly repaired, improperly assembled or
modified. Do not attempt to remove or
bypass any of the safety devices. Only use
cutting attachments indicated in the table.
14 - All labels with health hazards must be kept