User Manual LR-1BS2
OMEN-1BS2-202202
6
Figure 4 Diagram of Ethernet connection
4.3.
Communication interface
The LR-1BS2 is connected to the computer by a RJ-45 Ethernet interface. The computer
IP address should be set up before communication. The LiDAR and computer IP must be set
up in the same subnet without any conflict. The host port is 2368 by default.
The factory default settings are as follows
Computer IP
：
192.168.1.10
Computer subnet mask
：
255.255.255.0
The default factory settings of LiDAR are as follows
LiDAR IP
：
192.168.1.100
LiDAR subnet mask
：
255.255.255.0
The operation steps are as follows
Figure 5: Step 1 of computer IP setting
