User Manual LR-1BS35
OMEN-1BS35-202012
1
1.
Document description
To ensure the normal operation of the product and avoid damage to the equipment, please
do not disassemble the sensor.
Read the instructions: Please read through all the safety and operating instructions carefully
before using this product;
Properly keep the instructions: Please keep all the safety and operating instructions
properly for future reference;
Pay attention to the warnings: please pay attention to all the warnings on the product and
in the user manual;
Follow the instructions: Please follow all the operating instructions;
Maintenance instructions: please do not attempt to repair the product by yourself except
for following the troubleshooting instructions in the operation manual, and contact the
OLEI laser technicians for help in time.
Any equipment damage caused by violation of the above safety regulations is not covered
by the warranty.
2.
Safety Instruction
Pay attention to laser radiation
This product contains invisible Class 1 laser;
Do not dissemble the cover of the device without authorization. Removing the cover will
not cause the laser to turn off;
The laser is not guaranteed to be still Class 1 after the cover is removed.
Pay attention to electrical safety
Disconnect the power supply when connecting or removing electrical cables;
The power supply connected to the equipment must meet the requirements of the operating
instructions;
When using the equipment, connect the reference potential terminal correctly to avoid
personal injury caused by equipotential current.
3.
Product introduction
LR-1BS3/5 is a 2D flat scanning lidar, which scans the surrounding areas on a single plane
with the aid of an infrared invisible laser beam. Based on its measurement origin, LR-1BS3/5
uses two-dimensional polar coordinates to indicate the surrounding environment. With a
scanning angle range of 270°, LR-1BS3/5 detects and outputs the target's angle, distance and
signal strength to facilitate the SLAM system to better identify the target. Thus LR-1BS3/5 has
been widely applied to industries such as robot obstacle avoidance, safety monitoring, industrial
automation, and intelligent logistics.
