1-3
Six-Way Power Seat (If Equipped)
If your vehicle is equipped
with this feature, the
controls are located on the
outboard sides of both the
driver’s and the passenger’s
seat cushions.
To adjust the front seat cushions do any of
the following:
D Move the seat forward or rearward by sliding the
control toward the front or the rear of the vehicle.
D Raise or lower the seat cushion by sliding the control
up or down.
D Raise or lower the front portion of the seat cushion
by sliding the front of the control up or down.
D Raise or lower the rear portion of the seat cushion by
sliding the rear of the control up or down.
Four-Way Power Lumbar Driver’s
Seat (Option)
If the vehicle has this option, there is a control located
on the outboard side of the driver’s seat cushion, in front
of the reclining seatback lever. To increase or decrease
lumbar support, push the control forward or rearward.
To adjust the lumbar support up or down, push the
control up or down.
Summary of Contents for 2002 Intrigue
