2-34
Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
D Turn and Lane
-
Change Signals
D Headlamp High/Low
-
Beam Changer
D Flash
-
to
-
Pass
D Headlamps
D Taillamps
D Parking Lamps
Turn and Lane-Change Signals
The turn signal lever has two upward (for right) and
two downward (for left) positions. These positions allow
you to signal a turn or lane change.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will return automatically.
An arrow on the instrument
panel cluster will flash in
the direction of the turn
or lane change.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.
As you signal a turn or lane change, if the arrow flashes
faster than normal, a signal bulb may be burned out
and other drivers won’t see your turn signal.
Summary of Contents for 2001 intrigue
