Page 1: ... ...
Page 2: ...nd The 3 5 o clock position is roughly similar to an unchanged amount of brightness compared to the original signal If the blend control is fully counterclockwise the tone control has no effect on the sound Volume Acts as a master volume control for the entire signal when OD 78 is engaged Both the clean and overdriven sounds are affected by the volume control and works the same regardless of the b...
Page 3: ...25 70 Tone Set to taste Push To taste but this control has less and less effect with the gain control at lesser values This is a more overdrive than clean Phat Overdrive Blend 100 Volume 50 70 Drive 25 50 Tone 0 50 There is no real clean signal with these settings The overdrive is purely from the pedal the tone is intentionally reduced to get a browner sound The gain is set lower so that there isn...
Page 4: ...ounter clockwise until just a smidge of clean gets through The ideal setting is where you can t really hear the clean while adding some definition to the crunch This will retain sustain and creaminess while giving back some of the definition that gets lost with higher gain settings ...
