Page
6
CARE & MAINTENANCE
CLEANING
After your final batch of cotton candy in a session, keep the machine running
and hot while cleaning the floss head by slowly pouring a small amount of water
into the center.
NOTE: The water will immediately become hot steam.
Keep
the floss head spinning through until water runs almost clear. Then, allow the
machine to cool and dry with a damp cloth to remove excess sugar.
The cotton candy pan may be cleaned with mild soap and a soft cloth. Do not
use detergents.
REMOVING BURNT SUGAR
It is normal for a small amount of sugar to burn inside the machine, even with
regular cleanings. The cotton candy machine will not be harmed, nor the
produced candy. You may use a light-duty scrubbing sponge (do not use steel
wool or other abrasive materials) and a diluted vinegar solution.
CHANGING THE BELT
This package includes a spare belt.
To access belt:
Remove the cotton candy pan. Remove the screws holding on the
top cover of the machine.
To adjust belt:
Remove the top cover of the machine. Loosen the 4 motor
screws, reposition the motor slightly, and retighten the screws. Replace the top
cover and secure with screws.
