5 of 14
Index
Installation Instructions
1
Receiving
2
Clearances
3
Setup
4
Gas and Electrical Connections
5
Pizza Deck Care
6
Burner Lighting Procedure
7
Aeration Adjustments
Operating Instructions
1
Burner Lighting Procedure
2
Breaking In
3
Pre-Heating
4
Baking/Cooking
Cleaning & Maintenance
1
Stainless Steel Surfaces
2
Deck Maintenance
3
Lights
4
Ignitors
5
Glass
6
Parts Breakdown
For North America: 120V, 1 Phase, 60 Hz.
Unit comes with a NEMA 5-15 Plug
Type of Gas
Manifold Pressure
Natural
5.5” Water Column
LP
11” Water Column
Installation Instructions
1
Receiving:
Read the notice on the outside carton regarding damage in transit. Damage discovered after
opening the crate(s) / carton(s) is “
CONCEALED DAMAGE
” and the carrier must be notified immediately
to send an inspector and also furnish the forms for the consignee’s claim against the carrier.
When oven arrives, it should consist of : A crate or carton containing your new oven, a carton,
containing 4 legs with mounting hardware (if removable legs were shipped). Your glass posts and glass
will be packaged in bubble wrap.
Installation must conform with local codes and/or with the latest edition of the ANS Z-233.1 National
Fuel Gas Code in USA/ CAN/CGA-B149.1 or 2 Installation Code in Canada.
This appliance must be installed by a competent person.
Place the oven and parts as close as possible to the area of final installation before un-crating.
2
Clearances:
Minimum Clearance From
Combustible Construction
Non-Combustible Construction
Left Side
12”
6”
Right Side
12”
6”
Rear
24”
12”