produced by:
Distribution Partner: Fomacon Group
Mörsenbroicher Weg 191 | D- 40470 Düsseldorf
Tel.: +49 211 975 323 90
Free call: +49 800 11 00 77 5
www.vario-mat.com
E-Mail: [email protected]
Connecting the panels to the ramps (pedestrian side):
The panels are connected and screwed together using washers and screws (M16x30mm). All adjacent panels must be connected in
this way. Always install the panels so that the surfaces of the same type face upwards.
Ramp above:
1.9m long: 3x screws M16x30, 3x washers for screws M16
Ramp beneath:
1.9m long: 2x screws M16x30, 2x washers for screws M16
Ramp beneath:
0.9m long: 2x screws M16x30, 2x washers for screws M16
Ramp above:
0.9m long: 2x screws M16x30, 2x washers for screws M16
The design of the ramps installed above or beneath the panels, regardless of whether they are used for the vehicle or
pedestrian side, is identical. Only the number of connection options differs on the vehicle and pedestrian sides.
