![background image](http://html1.mh-extra.com/html/oktober/7/7_operation-manual_3658144022.webp)
Broken Handle
If you do happen to break a handle off, it is easy to replace. Chances are, the
broken threads are still in the roller housing. To remove them, use a small drill bit
(1/8in works well) to “drill out” the threads. You won’t actually drill into the
metal, but the bit will use friction to spin the threads out the other side of the
hole. When replacing the handle with a new one, make sure to tighten it in using
the nut between the handle and the black knob.
Hint: The threads that hold the black knob
on the handle are exactly the same as
the ones that attach the handle to the roller housing. If you remove the knob you
can turn it around and use the handle without the knob until a new handle arm
arrives.
Summary of Contents for 7
Page 4: ...MODEL 7 SEAMER DIAGRAM...