3.Operating and Programming
OKP_2.4 G
If you experience with network pairing failure, please restart the robot and start over
again. Or try the
AP mode
network pairing method instead.
AP MODE
1
Turn on the POWER switch on the side to turn on the
ROBOT.
12
K7
after you hear a beep in about 3 seconds, continue holding
the button for another 3 seconds until you hear two beeps.
The WiFi indicator flashes slowly and the ROBOT enters
into AP network configuration mode.
Press and hold the START/PAUSE button simultaneously;
2
Network paring
(Only works with 2.4G WIFI)
AP mode
