10
3.Operating and Programming
3.3 Cleaning Mode Selection
The Robot has several cleaning modes to choose from to effectively clean different floors.
Cleaning modes are selected using the Remote Control.
Spot Cleaning Mode
This mode is applicable for an area of highly concentrated
dirt or duct. In Sport Cleaning Mode, Robot focuses on a
speciic area to clean. Robot cleans the area in a spiral
pattern using MAX suction power and stops when it
completes Spot Cleaning.
To start Spot Cleaning Mode, press Spot Cleaning Mode
on the Remote Control
Edge Cleaning Mode
This mode is good for cleaning the edges and corners
of a room. In Edge Cleaning Mode, Robot cleans along
a border using MAX suction power (e.g. wall).
To start Edge Cleaning Mode, press the Edge Cleaning
Mode Button on the Remote Control.
Programmed Cleaning Mode
Robot will clean in Programmed Cleaning Pattern
optimized for hard floors.
Return to Charger Mode
When battery power gets low, Robot automatically
switches to Return to Charger Mode and returns to
the Charging Dock to recharge itself. Alternatively double
click on the Start/Pause button on the robot to start
the Return to Charger Mode.
*Robot can also be sent back to the Charging Dock
at any time by pressing the Return to Charger Button
on the Remote Control.
(Less than 3 minutes)
