H301-PRIOR-NZ100-H117
User Manual
REV 02
www.oko-lab.com
Pa
ge
4
2.
Insertion of the Sample Feedback Temperature Sensor
Insert the Sample Feedback Temperature Sensor through one of 12 perfusion holes (see par 6. Figure 7) located in the
H301-PRIOR-NZ100-H107 chamber riser (see Figure 2, Frontal and 3D views). Small screws plug the perfusion holes
when not in use. (
Grub screws M3x6
). Remove small screw as necessary before introducing the sample Feedback Tem-
perature Sensor.
1.Frontal view
2.3D view
Temperature Sensor dedicated opening
Temperature Sensor dedicated opening
Figure 2. Insertion of the temperature sensor inside the chamber.
3.
Working with 35 Petri Dish
The closing parts (A in Image1 of Figure 3) and the flat springs (B in Image 3 of Figure 3) prevent movement of 35 dish
inside of the sample holder (See Figure 3)
1
2
3
A
B
Figure 3. Plate adapter for 35 mm Petri-dish holder.
