OVERVIEW
1.
Underblanket
2.
Mains power cable
3.
Mains power cable connector
4.
Underblanket connector
5.
Tie cord
6.
Controller
Note:
UB20 has 2 sets of mains
power cables, power
cable/underblanket connectors
and controllers.
The controller has both numeric
and Braille heat markings.
The settings are:
0
OFF
1
Low heat (night use)
2
Medium heat (once bed is warm)
3
High heat (to pre-heat the bed)
FITTING THE UNDERBLANKET TO THE BED
1.
Spread the underblanket over the mattress.
•
Make sure the pillow area is clear.
•
The cables of the controller(s) should be
located at the pillow end with the cables
existing from underneath the
underblanket.
•
Check that the cables will not be
stretched, pinched or lay in a path where
they could be a trip hazard.
EG-5
Downloaded from www.vandenborre.be
