OPERATION
CLEANING AND MAINTENANCE
This overblanket is intended for warming the human body. It may
only be used as a cover.
1. Connect the power cable
connector to the overblanket
connector.
• Ensure the connector is
pushed home until
the locking catch engages.
2. Plug the controller into the closet mains socket and press
to turn on the appliance.
3. Repeatedly press on the controller to select the desired
heat level.
4. When the overblanket is not in use, switch off the controller
and then remove the plug from the mains socket.
• It is recommended to set the heat level to medium or high
level for 1 to 2 hours before sleeping on the bed and then
you can set the heat level to the low level or turn off the
appliance.
• The display will show 1, indicating the heat setting is 1.
• Heat settings:
The number shown on the display
1-2
Heat level
Low heat
Medium heat
High heat
3-4
5-6
Switch off and remove the controller from the overblanket
before cleaning.
The power cable must NEVER come into contact with water.
It is recommended to wash the overblanket only if it becomes
dirty or dusty.
Before using the overblanket, make sure it is completely dry.
Machine washing
The overblanket may be washed on the Delicate Wash setting of
washing machine at a maximum temperature of 30°C.
Drying
Hang the overblanket to air dry naturally in a horizontal position
until completely dry.
Do not expose to direct sunlight.
Do not dry with a hair dryer or heater.
Maintenance
Examine the overblanket regularly to check that there are no
signs of wear or damage. If any damage/wear is spotted, do not
use the overblanket and seek specialist advice. If the mains lead
or controller is damaged, do not open or attempt to repair them
as they must be serviced by a qualified person.
Storage
When not in use, allow to cool and dry then fold neatly but not
tightly (or roll) in the original packaging without sharp bends in
the heating element.
Store where no other objects will be placed upon it in a cool dry
place.
• Safety Timer: The appliance has a built-in timer and will
automatically switch off after 3 hours. The auto-off indicator
light will illuminate.
• To switch back on the appliance, first press and then
repeatedly press on the controller to select the desired
heat level.
Preheating the bed
DO NOT SLEEP WITH THE OVERBLANKET ON THE PREHEAT SETTING.
Locking catch
Downloaded from www.vandenborre.be
