Okoia HML6, Operating Instructions Manual

Page: 6 / 39

7. Plug the humidifier into the mains socket and turn it on by pressing .

The power indicator light will be illuminated.

The humidifier will produce mist.
Automatic Mode
Press on the control panel until the “Auto” indicator light will flash to select the automatic mode.
The humidity and misting level will be adjusted automatically.
To deactivate the mode, press until another mode is selected.
Misting
Repeatedly press on the control panel to select the misting control mode then repeatedly press
to select the desired mist amount.
OR
Repeatedly press on the remote control to select the desired mist amount.
The corresponding misting setting will be shown on the display.
1
: Low
2
: Medium
3
: High
Ion
The ion function is designed to purify the air.
To activate the function, press . The indicator light will be illuminated.
Humidity
The humidity level can be adjusted by repeatedly pressing on the remote control
OR
Repeatedly press on the control panel to select the humidity adjustment mode then repeatedly
press to select the desired humidity level.
The humidity range is between 45% RH to 90% RH with increments of 5% difference.
If the room humidity is equal to or higher than the set humidity the misting will not take place.
Timer
The timer allows the humidifier to operate from 1 to 12 hours.
To set the countdown timer, repeatedly press on the remote control to select the desired time.
OR
Repeatedly press on the control panel to select the timer mode then repeatedly press to select
the desired time.
The “Timer” indicator light will be illuminated.
EG-4
Downloaded from www.vandenborre.be