Oko LAVAMAT 86740, User Information, Page: 26 / 60

Operating Instructions
26
Wash cycle ended/Remove washing
After the wash programme has been ended,
L
(END) is displayed on
the programme cycle display.
•
If programme
<
(EASY IRON) has been selected, then a crease
guard programme of ca. 30 minutes is carried out after the pro-
gramme end. The multi-display then additionally shows a rest time of
1 minute and the display
L
(END) lights up. During the crease guard
programme, the door can be opened at any time and the washing can
be removed.
• If
o
(RINSE HOLD) has been selected, the display next to the
O
/
s
(START/PAUSE) button blinks.
0 1. After a rinse stop, the water must first be pumped out:
–
Either press the
O
/
s
(START/PAUSE) button (water is pumped out
and the washing is spun according to the position of the programme;
with the
o
/RINSE HOLD spin speed, the speed of spinning can also
still be changed during spinning),
or
–
Turn programme knob to
v
(PUMP) and press the
O
/
s
(START/
PAUSE) button (the water is pumped off without spinning),
or
– Turn programme knob to
K
(SPIN) or
L
(SHORT SPIN) and press
O
/
s
(START/PAUSE) button (water is pumped out and the washing
is spun or short spun).
After the end of this programme step, the
L
(END) display lights up.
2. Open filling door.
As soon as the display next to the
K
/
W
(DOOR/LIGHT) lights green, the
door can be opened (not when the programme security is activated. For
this see „Programme security“).
3. Remove washing.
4. Turn programme knob to
I
(OFF).
5. After washing, pull the washing agent drawer out a little so that it can
dry out. Lean door only against frame do that the washingmachine can
vent out.
3
If the indicator
Å
(OVERDOSING) lights up, too much deter-
gent was used in the washing program just ended. Observe the
dosing recommendations of the detergent manufacturer as well as the
filling quantity for the next wash.
Caution! If the washing machine is not used for a long time:
Close the water tap and disconnect the washing machine from the
electricity mains. (Anti-flood system Aqua Control with Aqua Alarm
does not function if the power supply is interrupted.)