User’s manual: FS-Reflexion
20
The recorded measurement values will be indicated in real time on the monitor of the
control unit
and can be analysed immediately. In figure
the graphical display is represented, to explain
the proper elements.
Signal display
Frequency-energy-
graph
Statistics
Progress indicator
Keyboard configuration
Figure 9: Graphical display in the monitor of the control unit
The
signal display
shows the raw measurement values of the seismic
vibration transducer
. The mea-
surement results are shown in real time during the measurement. The measurement values in
the
frequency-energy-graph
will be calculated and represented only after finishing the measurement
procedure. Only these values are relevant for analysing the measurement. In section
on page
you can find detailed information about the correct analysis of measurements.
The
statistics
represents at first the minimum and maximum of the raw data of the
signal display
and after that the minimum and maximum incl. the appropriate frequency indication of the
frequency-energy-graph
.
The
keyboard configuration
explains which buttons are configurated with which function. During
proceeding a measurement it can happen that some buttons are configurated with different
functions. Due to this indication the button configuration is easy visible.
The
progress indicator
consists of two parts, the progress bar on the left side and the information
on the right side next to it. The
progress indicator
is represented in figure
in large size.
OKM Ortungstechnik GmbH
