User’s manual: FS-Reflexion
14
4.1.2
Back side
Figure
shows the back side of the
Control unit
and its connections.
Connector for
vibration transducer
Connector for
power supply
Bluetooth
antenna
USB connector
Figure 4: Back side of the control unit
On the
Connector for vibration transducer
the seismic
vibration transducer
has to be connected. Via the
vibration transducer
the measured data will be detected and processed in the
control unit
.
On the
Connector for power supply
the
External power supply
has to be connected.
Via the
USB connector
the
control unit
can be connected to a computer via a USB cable, to transfer
the stored measured values and represent them in a software.
OKM Ortungstechnik GmbH