4
Control elements
13
4.1
Control unit
The
control unit
is the data processing center of the Reflexion. All measured data will be processed
and if needed stored.
4.1.1
Front view
Figure
shows all control elements on the front side of the
Control unit
.
Power on button
Start
Operating lamp
Bluetooth lamp
Previous
operating mode
Next
operating mode
Activate
operating mode
Figure 3: Front view of control unit
The
power on button
is used to switch on the device. Before you like to operate your measuring
instrument make sure that the delivered
external power supply
is connected and powered on.
The button
start
is necessary to start a measurement in the
Scan Mode
.
The
operating lamp
indicates the state of readiness of the
control unit
and shines red, as soon as it
will be powered on.
The
bluetooth lamp
shines green, as soon as the bluetooth connection is established between the
control unit
and the
transmitter
.
By using the keys
(
Previous operating mode
) and
(
Next operating mode
) you can select every
single operating mode of the main menu. To confirm your selection please press the button
(
Activate operating mode
). Within each operating mode the keys will have a different configuration,
which will be explained at the moment in time in this user manual.
OKM Ortungstechnik GmbH
