18
Assembly
Before you can use the device Bionic X4 for a field measurement you should do some preparations.
Please pay attention to the following steps!
OKM GmbH
Figure 5.1: Connecting the Power Pack with the device
Step 1
Connect the cable of the Power Pack with the
device.
Figure 5.2: Switch on the Power Pack
Step 2
Switch on your Power Pack. The LED on your
Power Pack should light up in green now.
If the LED shows red, you have to charge the
Power Pack first.
Figure 5.3: Switch on the Smart Phone
Step 3
If you decide to work with Smart Phone you
have to switch it on and follow the next steps.
If you decide to work without Smart Phone
you have to continue with step 8!