7
Cabinet Shelf Installation
-
1)
Place one shelf (Part F) at the bottom of cabinet assuring that it is firmly resting on ledg-
es of the interior of the side and pack panels of cabinet.
2)
While holding on a slanted position, place the remaining two shelves (Parts F) on the
ledges of side panels assuring that they are firmly resting on ledges of the interior of the
side panels of cabinet
.
Door assembly & installation
-
1)
Identify right cabinet door (Part G) and using pivot pins from hardware packet #2, in-
stall a pivot into the pre
-
drilled holes on the bottom and top of doors.
2)
Identify left cabinet door (Part H) and using pivot pins from hardware packet #2, in-
stall a pivot into the pre
-
drilled holes on the bottom and top of doors.
3)
Using silver Phillips head screws and black handles from hardware packet #1, install
door knobs onto panels (G) & (H) using a Philips screw driver.
4)
While holding door (part G), insert pivot of bottom of door into the hole located on
right side of cabinet bottom. Align door with the top of door frame and slide upper
pivot into hole at right side of door frame top.
5)
While holding door (part H), insert pivot of bottom of door into the hole located on
left side of cabinet bottom. Align door with the top of door frame and slide upper piv-
ot into hole at left side of door frame top. See diagram below.
Summary of Contents for GSL
Page 1: ...1 The Greystone Lectern ASSEMBLY MANUAL Model GSL...
Page 9: ...9...
