Oklahoma Sound GSL, Assembly Manual

Page: 12 / 13

12
Side shelf assembly & installation -
1) Identify right side shelf front panel (Part K) and using a silver Philips head screw and
black knob from hardware packet #1, install knob onto front panel.
2) Identify right side shelf bottom panel (Part # K - 1) and connect front panel to it in the
following manner:
3) Tightly Screw in one cam bolt (found in packet #2) at each of the two outer holes of the
inside of the front panel.
4) Tightly insert one dowel (found in packet #2) at each of the two inner holes of the in-
side of the front panel.
5) Place the bottom panel (Part # K - 1) with the side that has holes next to the front panel.
6) Install cam locks into the holes of the bottom panel.
7) Align front panel cam bolts & dowels with holes on bottom panel and push in.
8) Once front panel and side panels are attached, secure by turning cam bolts clockwise
to locked position.
9) Using four zinc plated 12mm Philip - head screws, attach shelf to tracks by installing
screws through tabs located underneath of keyboard.
10)Repeat this process for assembly & installation of left side shelf (Parts L & L - 1)
Drawer Installation -
1) To install drawer into cabinet, pull inner portions of tracks out of the cabinet.
2) Next insert tracks that are on drawer sides into inner portion of cabinet tracks while
pulling down black plastic tabs on track.