background image

A MAJOR CAUSE OF FIRES IS FAILURE TO MAINTAIN REQUIRED 

CLEARANCES (AIR SPACES) TO COMBUSTIBLE MATERIALS. IT IS OF 

UTMOST IMPORTANCE THAT THIS PRODUCT BE INSTALLED ONLY IN 

ACCORDANCE WITH THESE INSTRUCTIONS.

IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY.

DLX PELLET GRILL

MODEL NUMBER 20209106

ASSEMBLY GUIDE

PN: 42805505 • 05/10/2020

Need Help? Visit Oklahomajoes.com for video assembly tips. If you’d rather - you can call us at 1-800-318-7744

Necesita ayuda? Visite Oklahomajoes.com para obtener consejos sobre el montaje de videos. Si prefiere, puede llamarnos al 1-800-318-7744

Besoin d’aide? Visitez Oklahomajoes.com pour des astuces d’assemblage vidéo. Si vous préférez, vous pouvez nous appeler au 1-800-318-7744

SERIAL NUMBER:

NÚMERO DE SERIE:

NUMÉRO DE SÉRIE:

______________________________________

See rating label on grill for serial number.

El número de serie se encuentra en la etiqueta 

deespecificaciones de la parrilla.

Voir l’étiquette d’évaluation sur le gril pour le numéro 

de série.

DATE PURCHASED:

FECHA DE COMPRA:

DATE D’ACHAT:

______________________________________

Summary of Contents for Rider DLX





























Reviews: