OkiOki Coastal 5 Drawer Dresser, Instructional Manual

Page: 12 / 28

B: Determine the location where the screws should be inserted into the
wall. Mark the point at the same height on the wall as the L-shaped
Metal Bracket ( ) on the Dresser. Here are two helpful ways to find
these points:
1. Move the Dresser back to the wall - make sure these points on the
wall and on the Dresser are at the same height.
2. Using a ruler, measure the height from the floor to the Metal Bracket
( ) on the Dresser and mark the wall at the same height. Use a
Power Drill ( ) (not provided) to make a hole in the wall, then
insert a Plastic Anchor ( ) into the hole using a Hammer ( ) (not
provided).
Repeat this step to affix the other Plastic Anchor ( ) into the wall as
shown above.
11