Copyright © 2010. All Rights Reserved.
www.okinausa.com 1 REV012011-V05
WDEM-7680
680 TVL
WDEM-7610
610 TVL
PACKAGE CONTENTS
WDE-7680
Color: 680 TVL, B/W: 700 TVL
Powerful 510x WDR (54dB)
WDE-7610
Color: 610 TVL, B/W: 630 TVL
Powerful 256x WDR (53dB)
1/3" Hyper Wide Dynamic Color Camera, Effio WDR DSP
Color: 0.03 Lux @ F1.0, B/W: 0.01 Lux @ F1.0,
Sense-up: 0.0001 Lux @ F1.0
Mechanical IR Cut Filter (ICR)
Multi-Language OSD Control / RS485 Control
Ideal for Backlight Environments
2D/3D Noise Reduction & Sense Up (512x) Functions
High Contrast Images; Face Detection of up to 4 faces
E-zoom Function (1~256x)
Advanced Motion Detection Function
Polygonal Mosaic Privacy Mask; Freeze / Timer Clock
12V DC / 24V AC, 3.0W
FEATURES
One (1) WDEM-7680 or WDEM-7610 camera
One (1) DC Connector
One (1) CS Mount Ring
One
(1)
DC
Plug
One
(1)
Allen
Wrench
One (1) Warning Sign Sticker
One (1) Quick Setup Guide
One (1) CD with User Manual
*
For any returns, please include all components listed above with
original packaging in
Resalable Condition
.
Absolutely No Returns
will
be accepted if any components are missing/damaged or if any cable is
tampered with.
DIMENSIONS (Unit: mm)
DESCRIPTION OF CAMERA PARTS
(1) Lens
Mount
This mount is used to install a CS-mount lens. CS-adaptor ring is
required when using a C mount lens.
(2) Camera Mounting Screw Holes
Screw hold for mounting the camera.
(3) Mount
Adapter
The adapter can be attached onto the top or bottom of the unit.
(4) Auto Iris Lens Connector (4-pin type)
The lens connector supplies the auto-iris lens (not supplied) with DC
control signal
(5) S-Video Output Terminal
Separate Y (brightness) and C (color) signal are outputs from this
terminal to obtain better video quality at a video monitor.
1. C signal: 0.3V (p-p), 75
Ω
, unbalance 3. C signal Ground
2. Y signal: 1.0V (p-p), 75
Ω
, unbalance, 4. Y signal Ground
negative synchronizing
(6) Iris Mode Selection Switch
Select DC or VIDEO mode according to the lens.
(7)
OSD Control Buttons
ENTER button
UP & DOWN buttons
LEFT & RIGHT buttons
(8) Video
Connector
Video can be outputted via this BNC connector (75
Ω
).
(9) Communication
Connectors
1. RS485+
4. Day & Night Output
2.
RS485-
5.
Alarm
Out
3. Day & Night External Input
6. Ground
(10) Power Input Indicator Light
When the camera is connected to a power source, the indicator light
will be on.
(11) RS485 Terminal Impedance Switch
Set the first and the last equipment terminal impedances as 120
Ω
and set the rest parallel connection equipment in the middle as HiZ to
obtain the best transmitting status.
(12) Power Input Terminal
Connect the power input of 12V DC/24V AC (10.8~39V DC/24V AC).
Hyper Wide Dynamic Camera
Effio WDR
Quick Setup Guide
** Please refer to User Manual CD for detailed information **
