6.OSD - Patterns, Tours
Some products may not be available in your country, please contact our distributor for more details
Some products may not be available in your country, please contact our distributor for more details
6.OSD - Zones and Privacy Mask
Patterns
Patterns record the user ’s movement while
performing PTZ operations and stores them as a
track. The Speed Dome can record up to 4 tracks
with max. 180 sec. each.
PATTERN NUMBER:
PROGRAM PATTERN:
RUN PATTERN:
CLEAR PATTERN:
EDIT PATTERN LABEL :
Supports up to 4 patterns.
Starts recording the
pattern when selected. You can perfom PTZ
movements for recording (not exceeding 180 sec.).
Press IRIS-OPEN to save the track.
Starts the current pattern.
Deletes the current pattern.
Sets the name for the
current pattern.
Tour
Tour is an auto-operation running through selected
preset points with definable pause time. A tour can
store up to 24 preset points.
TOUR NUMBER:
TOUR PRESETS (P0):
SPEED (S):
TOUR DWELL (TM):
RUN TOUR:
Supports up to 4 tours.
Move the joystick up and
down to select the preset points by number and
save the settings by going to the left end of the line.
If a selected point has the value 0, all the following
preset points will be ignored.
Speed of the dome between 2 points.
Pause duration after reaching
a preset point. Duration can be set between 00-
60(s).
Starts the tour and exits the OSD
Menu.
TOURS
TOUR NUMBER
1
EDIT TOUR
RUN TOUR
CLEAR TOUR
BACK
EXIT
EDIT
TOUR
PATTERNS
PATTERN NUMBER
1
PROGRAM PATTERN
RUN PATTERN
CLEAR PATTERN
EDIT PATTERN LABEL
BACK
EXIT
17
18
Zones
You can define the zones in the whole PT range up to
8 zones. When the display setting “Zone Label” is
activated, its label will be displayed on the screen.
The defined ranges of the zones should not be
overlapping.
Supports up to 8 zones.
Left boarder of the current zone.
Right boarder of the current zone.
Delet the current zone.
Changes the label (name) of the
current zone.
ZONE NUMBER:
SET LEFT LIMIT:
SET RIGHT LIMIT:
CLEAR ZONE:
EDIT ZONE LABEL :
ZONES
ZONE NUMBER
1
SET LEFT LIMIT
SET RIGHT LIMIT
CLEAR ZONE
EDIT ZONE LABEL
BACK
EXIT
Privacy Mask (Window Blanking)
Privacy Mask is used to protect the privacy area that
should not be displayed once the camera is pointed
on it, such as lavatory areas or the operation desk of
an ATM machine. This might be mandatory required
by local law regulations. The Speed Dome supports
up to 24 private masks (depending on the installed
camera module; please contact your local sales
representative for more information).
Hitachi camera modules
Sony Camera modules:
LG,CNB Camera modules:
: 8 masking areas
up to 24 masking areas
(except the 45 series provides only 8)
no masking function
Mask number.
Edit position of the mask using the
keyboard’s joystick. Presse IRIS-OPEN to save.
Shows the mask on the screen.
Deletes the mask.
WINDOW NUMBER:
EDIT WINDOW:
ENABLE WINDOW:
CLEAR WINDOW:
WINDOW BLANKING
WINDOW NUMBER
01
EDIT WINDOW
ENABLE WINDOW
OFF
CLEAR WINDOW
BACK
EXIT
PO-S-TM PO-S-TM PO-S-TM
00-0-00
00-0-00
00-0-00
00-0-00
00-0-00
00-0-00
00-0-00
00-0-00
00-0-00
00-0-00
00-0-00
00-0-00
00-0-00
00-0-00
00-0-00
00-0-00
00-0-00
00-0-00
00-0-00
00-0-00
00-0-00
00-0-00
00-0-00
00-0-00
BACK
EXIT
