Copyright © 2010. All Rights Reserved.
www.okinausa.com 26 REV122010-V17
* DATE / TIME
HH: Hour, MM: Minute, SS: Second, YY: Year, MM: Month, DD: Date.
Select ON/OFF to show/hide the Date/Time on the screen.
* COMM
There’re sub-menus under this section. Select SET
<
┘
to do further setups.
1. The CAM ID, PROTOCOL and BAUD RATE will be displayed for the first five seconds on
boot.
2. Changes made to the CAM ID, PROTOCOL and BAUD RATE will only take effect after you
exit the COMM page. This is to prevent the camera from unexpected disconnecting caused by
remote access.
•CAM ID:
1~1024
•DISP CAMERA ID:
ON/OFF (*Select ON/OFF to show/hide the CAM ID on the screen.)
•PROTOCOL:
PELCO-D, PELCO-P
•BAUD RATE:
2400/4800/9600/19200/38400
* SYNC
•INT:
Internal synchronization
•LL:
External line-lock synchronization: when LL is selected, press the ENTER button to confirm.
The phase can be set from
0
to
359
.
* LANGUAGE
•ENGLISH •
简体中文
•
繁體中文
Use the LEFT & RIGHT buttons to select the language preference.
* FIRMWARE
Please refer to the actual firmware.
* RESTORE
Please choose
CANCEL
to exit; once the
CONTINUE
is chosen, all the settings will be restored
to the defaults except for the following:
CAM ID
,
PROTOCOL
,
BAUD RATE
and
LANGUAGE
.
** DATE / TIME **
TIME
10:00:00
DATE
10:01:01
FORMAT
YY:MM:DD
RETURN EXIT
