Copyright 2010. All Rights Reserved.
www.okinausa.com 3
REV012011-V03
6
3
2
1
0
7
5
4
ME/AES Shutter Control
(0) 1/100 (120) sec.
(1)
1/190 sec.
(2) 1/350 sec.
(3) 1/610 sec.
(4) 1/1120 sec.
(5) 1/2000
sec.
(6) 1/3240 sec.
(7) 1/4000
sec.
Camera to object moving speed
Shutter Speed
45~60ft
(15~20m)
60~100ft
(20~35m)
100~180ft
(35~60m)
1/100
sec
1/190
sec
1/350
sec
1/610 sec
15~35 mi/hr
(30~60 Km/hr)
45~45 mi/hr
(45~75 Km/hr)
1/1120 sec
20~40 mi/hr
(35~65 Km/hr)
35~53 mi/hr
(55~85 Km/hr)
1/2000 sec
25~45 mi/hr
(45~75 Km/hr)
40~60 mi/hr
(65~95 Km/hr)
1/3240 sec
30~50 mi/hr
(50~80 Km/hr)
50~62 mi/hr
(80~100 Km/hr)
50~62 mi/hr
(80~100 Km/hr)
1/4000 sec
35~55 mi/hr
(60~90 Km/hr)
55~65 mi/hr
(90~105 Km/hr)
55~65 mi/hr
(90~105 Km/hr)
*The table above is only for reference. Values may change due to the angle of the camera and the installation location.
Control Switch
SW1. BLC: Backlight Compensation OFF/BLC switch
SW2. Day/Night Mode: D/N / Color switch
SW3. AGC: Automatic Gain Control AGC/S.AGC switch
SW4. Sync Mode: Sync Mode Selection L.L/INT switch
Video Connector
Output for connecting to a video monitor or recorder.
Auto Iris Mode Selection Switch
For switching the output from the auto iris connector. Shutter speed is fixed at 1/100(120) sec. when switch is set to DC or
VIDEO position.
DC: To be set when using a auto iris lens. Be sure to adjust proper DC level for D&N operation.
CAR-DC: To be set when using for license plate capture. (Car speed is up to 90 mi/hr (150 km/hr) in the
daytime and 90 mi/hr (150 km/hr) at night with external IR LEDs).
VIDEO: To be set when using an auto iris lens with built-in amp.
V.P. (Vertical Phase) Adjustor
Used to adjust the vertical phase of the video output signal
Power Input Terminal
Connect the power supply of 12V DC or 24V AC.