Copyright © 2010 by OKINA USA
D-202
www.okinausa.com 6
rev070710
NOTE: When selecting DC DRIVE, the shutter speed will be fixed at 1/60 (NTSC), 1/50 (PAL) which
the shutter mode is not selectable. When the shutter is set as FLK or MANUAL, SENS-UP will not
work.
Setup: White Balance
Setup: Back Light Compensation (BLC)
Setup: Auto Gain Control (AGC)
1.
Position the arrow to WHITE BAL in setup menu by UP/DOWN
button.
2.
Press LEFT/RIGHT to select WHITE BAL mode.
ATW: Auto Tracking White Balance
The camera will track the color temperature at a range between
1800°K~10500°K and keep white balance automatically.
AWC: Auto White Balance Control
AWC adjusts the white balance.
1.
Select AWC
2.
Place a white sheet of paper in front of the camera to
obtain the optimum state under current illumination.
3.
Press SETUP, the white balance is adjusted.
4.
Repeat step 2 when the light source is changed.
The function works when there is a strong back light behind the
object.
1.
Position the arrow to BACKLIGHT in setup menu by pressing
UP/DOWN button.
2.
Select the mode you wish to operate by pressing
LEFT/RIGHT button.
HIGH: The gain increases from 0dB up to 42dB
MIDDLE: The gain increases from 0dB up to 30dB
LOW: The gain increases from 0dB up to 18dB
OFF: BLC function is disabled
Turn on AGC when the light source is low to amplify the image
signal and to enhance the brightness in low illumination.
1.
Position the arrow to AGC in setup menu by pressing
UP/DOWN button.
2.
Select the mode you wish to operate by pressing
LEFT/RIGHT button.
HIGH: The gain increases from 6dB up to 42dB
MIDDLE: The gain increases from 6dB up to 30dB
LOW: The gain increases from 6dB up to 18dB
OFF: The gain is fixed at 6dB
5
MANUAL
1.
Select MANUAL and press SETUP to enter into menu.
2.
Choose RED/BLUE by UP/DOWN and increase or decrease
the red and blue values thru LEFT/RIGHT buttons.
3.
Return to last menu by pressing SETUP while finishing
modification.
