background image

ESDX-3420_Rev03102008 

 
 
 
 
 

 
 
 
 
 

 
 
 
 

1.

 

Remove the dome cover from the mounting base by 
rotating the dome cover clockwise. 

 
2.

 

Adjust the camera viewing angle by first tilting it, and then 
rotate the camera module. Then turn the horizontal 
adjustment ring to correct the image and achieve proper 
orientation. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

3.

 

Once the installation is complete, replace the dome cover 
over the camera and tighten it by turning counter 
clockwise. 

 
4.

 

Connect the video output to the monitor or other video 
device through a 75 Ohm type coaxial cable and the 
DC-Jack or AC/DC-Terminator to the power source. 

 

 

 

Note: Power adapter is sold separately. 

 

 

 
 
 
 
 
 
 

 

One (1) ESDX-3420 or ESDX-3420P Dome Camera with 
power/video cable 

 

Four (4) Mounting Screws 

 

One (1) Operational Manual 

 
 

 

Model 

ESDX-3420 ESDX-3420P 

TV System 

NTSC PAL 

Image Sensor 

1/3” Sony Super HAD CCD 

DSP 

Sony 

Total Pixel 

510(H) x 492(V) 

500(H) x 582(V) 

Synchronizing 
System 

Internal 

Resolution 

420 TV Lines 

Minimum 
Illumination 

0.3 Lux @ F2.0 

S/N Ratio 

More than 48dB 

Auto Gain Control 

Auto 

White Balance 

Auto 

Gamma 

0.45 

Electronic Shutter 

1/60~1/100,000sec 1/50~1/100,000sec

Video Output 

1Vp-p composite / 75 

 

Lens 

3.6mm Board Lens / F2.0 

Power Supply 

12V DC 

Power 
Consumption 

130mA 

Operating 
Temperature 

-10°C ~ +50°C 

Dimension 

62mm x Ø 87.5mm 

SPECIFICATIONS 

INSTALLATION 

PACKAGE CONTENTS

Top

Rotate  

Ti

lt 

  

Top

To

p

Camera 
Module

Horizontal 
Adjustment
Ring

Reviews: