DDR-04 / DDR-08 / DDR-16 User’s Manual
R201401-V29
24
4.6.2
Network stream
Step1: enter into system configuration
network configuration
sub stream; refer to Fig 4-32:
16CH
Fig 4-32 network configuration-sub stream
Step2: select fps, resolution, quality, encode and max bit rate
Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit
current interface.
Definitions and descriptions of network stream:
Parameter
Meaning
FPS
Range from: 1-25
Resolution
Support CIF and D1
Quality
The quality of the clients’ image. The higher the value is, the clearer the record image.
Six options: lowest, lower, low, medium, higher and highest.
Encode
VBR and CBR
Max bit rate
Range from: 64 Kbps
、
128 Kbps
、
256 Kbps
、
512 Kbps
、
768 Kbps
、
1Mbps
、
2 Mbps
4.6.3
Step1: enter into system configuration
network configuration
email; refer to Fig 4-31:
Fig 4-31 network configuration-email
SMTP Server/Port:
the name and port number of SMTP server.
If your SMTP server supports the secure connection (SSL), like Gmail, please set the “Port” to 465 and check “SSL Check”
Send address/password:
sender’s email address/password
Receive address:
receiver’s email address. Here user can add at least three mail addresses.
Click TEST button to test the valid of the mailbox.
Attaching image amount:
user can attach at most three images at one time.
Snap Time Interval(s):
User can select snap time interval.
“Strongly recommend to use Google mail (gmail)”
For Example:
SMTP Server: smtp.gmail.com
Port: 465
SSL Check: V
Send Address:
Receive Address1:
