DDR-04 / DDR-08 / DDR-16 User’s Manual
R201401-V29
19
Step2: the setup steps of motion are familiar with schedule; user can refer to 4.4.1 Schedule for details.
Note: the default schedule of motion detection is full-selected, that is, the color of schedule setting
interface is blue.
4.4.3
Sensor
Step1: enter into system configuration
schedule configuration
alarm; refer to Fig 4-17:
Step2: the setup steps of alarm are familiar with schedule; user can refer to 4.4.1 Schedule for details.
Note: the default schedule of sensor is full-selected, that is, the color of schedule setting interface is blue.
Fig 4-17 schedule configuration-sensor
4.5 Alarm configuration
Alarm configuration includes five sub menus: sensor, motion, video loss, other alarm and alarm out.
4.5.1 Sensor
Sensor includes three sub menus: basic, alarm handling and schedule.
①
Basic
Step1: enter into system configuration
alarm configuration
sensor
basic; refer to Fig 4-18:
Fig 4-18 alarm configuration-sensor-basic
Step2: enable sensor alarm, set the alarm type according to triggered alarm type. Two option: NO and NC.
Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit
current interface.
②
Alarm handling
Step1: enter into system configuration
alarm configuration
sensor
alarm handling; refer to Fig 4-19:
Fig 4-19 alarm configuration-sensor-alarm handling
