Page: 43
Service Guide OL400
Chapter 3 Maintenance & Disassembly
3.2.07 Main Motor
1. Perform these procedures:
3.2.01{
}
3.2.03{
}
3.2.04{
}
3.2.05{
}
3.2.06{
}
2. Remove the three mounting screws (1) and detach the shield frame (2).
3. Detach the interconnect board (3).
NOTE:
The traces which run the entire length of the board are to the front of the printer when the board is
installed.
4. Working from the bottom of the printer, remove the motor cover (4) by releasing the two black
claws (5).
5. Remove the two high voltage wires from the motor cover.
6. Shift the motor assembly to the left to remove it from the claws (6) of the lower unit.
7. Working on the motor assembly, remove the two mounting screws (7) to remove the main
motor (8) from the motor assembly.