OKIDATA OKIOFFICE 44, Service Manual

Page: 69 / 388

T.F.
No.
Item Specifications Default
Installation Procedure 2 - 20 OKIOFFICE 44
Service Manual, P/N 59276801
Service Personnel Initial Settings Table 2.9.1 (2/7)
06 No-toner memory reception
07 TAD mode
(For external telephone answering de-
vice.)
NOTE:
If the REMOTE RX Function is set to
a value other than OFF, that code can
be used to force FAX RX during TAD
Mode.
08 Real time dialing
09 TEL/FAX switching
Enables or disables the memory reception when the
fax is in no toner condition.
ON : The messages are printed when toner has
been newly supplied or an operator per-
forms the memory operation (OT10).
OFF : The messages are printed in the print mode.
But print quality is not guaranteed.
Allows the OKIOFFICE to share a telephone line
with an answering device.
TAD mode is of two types (TYPE1/TYPE2).
OFF/TYPE1/TYPE2 selectable.
TYPE1 means:
1. RING comes.
2. The TAD answers, returns the recorded voice
message in TAD to calling party.
3. The FAX machine will continue to detect CNG
signal while TAD works.
4. If the FAX machine detects CNG signal, the fax
will go into normal receiving mode.
5. Even though the fax does not detect CNG signal,
the fax will go to receiving mode in hook-on
condition.
TYPE2 means:
The function from No. 1 to No. 4 of upper TYPE2 are
the same as TYPE1.
5. If the fax does not detect CNG signal during
working of TAD, the machine will go to standby
mode.
Enables or disables the real time dialling.
3 types selectable. (OFF/TYPE1/TYPE2)
TYPE1: Real-time dialling is available when the
optional telephone handset is OFF-HOOK.
TYPE2: Real-time dialling is available when the
optional telephone handset is OFF-HOOK
or HOOK key is pressed.
Enables or disables the TEl/FAX automatic switch-
ing.
ON : Enable
OFF : Disable
(Related item: FP10, TF23)
OFF
TYPE 2
TYPE 2
ON