![background image](http://html.mh-extra.com/html/okidata/microline-ml395c/microline-ml395c_service-manual_3642329166.webp)
for a previous job. The codes will override panel or menu settings.
Check the word processors manual to see if the initialization string can be modified. If so, remove any
codes that interfere with the printers settings.
To set the printer to ignore the reset code, follow this procedure.
1. Press SELECT until the SELECT lamp goes out.
2. Press QUIET.
3. The first Group/Item/Setting will print.
4. Press GROUP until GENERAL CONTROL prints.
5. Press ITEM until RESET INHIBIT prints.
6. Press SET until YES prints.
7. Press EXIT to exit the Menu Mode.
This will stop the reset code from resetting the printer, but other codes in the initialization string may still
override the printer Menu and / or front panel settings.
8. Output is missing dots.
Check the headgap setting. Move the head gap lever to a lower setting.
Setting 1 is for one or two part forms.
Setting 2 is for three or four part forms.
Settings 3, 4, and 5 are for envelopes and extra-thick paper.
Perform the Printhead Gap Adjustment. Refer to Section 3.3 of this Service Handbook for details.
Refer to RAP 03.
9. Strange symbols and incorrect fonts appear during a print run.
The printer driver does not agree with the emulation selected for the printer.
OR
Incorrect printer commands are embedded within the software.
To check the selected emulation, follow this procedure.
1. Verify that the printer is loaded with paper.
2. Deselect the printer. The SELECT lamp will NOT be lit.
3. Press QUIET to enter Menu Mode.
4. A line prints, indicating the emulation selected.
Summary of Contents for Microline ML395C
