Oki Pacemark PM4410 Safety & Warranty Download

Page: 3 / 28

3 - English

English

Safety Information, 120-Volt Models

For all countries / regions
Your OKI product has been carefully designed to give you
years of safe, reliable performance. As with all electrical
equipment, there are a few basic precautions you should take
to avoid hurting yourself or damaging the product.
• Carefully read the provided setup and operating

instructions.

• Save all provided documentation for future reference.
• Read and follow all warning and instruction labels on the

product itself.

• The printhead can get quite hot when it has been printing

for a length of time. Do not touch the printhead until it has
had a chance to cool off.

• Unplug the product before you clean it. Use only a damp

cloth; do not use liquid or aerosol cleaners.

• Place your product on a firm, solid surface. If you put it on

something unsteady, it may fall and be damaged. If you
place it on a soft surface, such as a rug, sofa, or cushion,
the vents may be blocked, causing the product to overheat.

• Protect your product from overheating. Make sure no

obstructions block the openings of the product. Do not put
the product on or near a heat source (such as a radiator or
heat register). Keep the product out of direct sunlight.

• Always use this product in a well ventilated area. Allow

enough room around the product for adequate ventilation
and easy access to the paper trays. If you put the product
in any kind of enclosure, make sure the enclosure is well
ventilated.

• Do not use your product near water. Do not spill liquid of

any kind into it.

• Be certain that your power source matches the rating listed

on the back of the product. If you are not sure, check with
your dealer or with your local power company.

• Do not connect this product to an uninterruptible power

supply (UPS). For further information please contact Oki
Data at 1-800-OKI-DATA.

• Your product has a grounded, three-prong plug as a safety

feature. This plug only fits into a grounded outlet. If the
plug does not fit, the outlet may be an older, non-grounded
type. Contact an electrician to have the outlet replaced. Do
not use an adapter to defeat the grounding.

• Install the product near an easily accessed power outlet.
• Avoid damaging the power cord. Do not put anything on it

or place it where it will be walked on. If the cord becomes
damaged or frayed, replace it immediately.

• If you are using an extension cord or power strip with the

product, make sure that the total of the amperes required
by all the equipment on the extension is less than the
extension’s rating. The total ratings of all equipment
plugged into the outlet should not exceed 15 amperes.

• Do not poke anything into the ventilation slots of the

product. You could get an electrical shock or cause
hazardous electrical arcing, which could cause a fire.

• Aside from the routine maintenance described in the

documentation, do not try to service the product yourself.
Removing the cover may expose you to shocks or other
hazards.

• Do not make any adjustments other than those outlined in

the documentation. You may cause damage that will require
extensive repair work. The provided documentation

explains how to get your product serviced by qualified Oki
Data technicians.

If anything happens that indicates that your product is not
working properly or has been damaged, unplug it immediately
and follow the procedures in the provided documentation for
having your product serviced.
Here are some of the things to look for.
• The power cord or plug is frayed or damaged.
• Liquid has been spilled into the product, or the product has

been exposed to water.

• The product has been dropped, or the cabinet is damaged.
• The product does not function normally when you are

following the operating instructions.

Additional Safety Informaton for
Telecommunications Equipment

When using your telephone equipment, basic safety
precautions should always be followed to reduce the risk of
fire, electric shock and injury to persons, including the
following:
• Do not use this product near water—for example, near a

bathtub, washbowl, kitchen sink or laundry tub—in a wet
basement, or near a swimming pool.

• Avoid using a telephone (other than a cordless type) during

an electrical storm. There may be a remote risk of electric
shock from lightning.

• Do not use the telephone to report a gas leak in the vicinity

of the leak.

• Use only the power cord and batteries indicated in this

manual. Do not dispose of batteries in a fire. They may
explode. Check with local codes for possible special disposal
instructions.

SAVE THESE INSTRUCTIONS.

English

Safety Information, 220/240-Volt Models

All Countries / Regions
This product has been carefully designed to give years of safe,
reliable performance. As with all electrical equipment,
however, there are a few basic precautions that should be
taken to avoid injury or damage:

Ensure this and all other documentation is both read carefully and

retained for future reference.

Ensure all warning and instruction labels on the product are read,

understood and followed in order to prevent any risk of injury.

This product may be heavy. Please check the weight of the product

and take all necessary precautions to prevent the risk of personal

injury.

The product must be placed on a flat solid surface strong enough to

support its weight to prevent any risk of injury.

Ensure that there is adequate ventilation all around the product to

prevent overheating and any risk of fire.

Keep the product away from direct heat sources such as radiators