Category
LCD status message
Trouble or status
Remedy
40931201TH Rev.4
115 /
Daily status
Replace the toner cartridge.
Check the operation of the toner sensor lever.
Replace the Power Supply Unit (High Voltage)
Replace the main board.
Note: When replacing the main board, install the EEPROM
mounted on the replaced main board.
Repace the image drum cartridge.
Note: After replacing the drum cartridge, reset the drum
counter. (Refer to the User's Manual)
Replace the fuser unit.
Note: After replacing the fuser unit reset the fuser counter.
(Refer to chapter 4.2.1)
Normal operation.
Normal operation
Indicates that the toner is almost empty. (This is indicated after 100
pages after "TONER LOW" indication.)
This will be indicated along with other messages in the first line.
However, this will not be indicated when "CHANGE DRUM" is being
indicated during drum life.
Cancel Print/Continue normal operation is possible.
Informs that toner sensor detects an error.
But when the total drum count were > 30 pages, this error would be
indicated, when the total drum count were= < 30 pages, an impossible-
to reset alarm "ERROR 77" , which will be described later, would be
indicated.
This is indicated in combination with other messages of the first line.
Normal operation is passible.
Informs of the drum life.
This is indicated in combination with other messages of the first line.
Normal operation is enabled if desired.
During this indication is displayed, a toner alarm "TONER LOW",
"TONER EMPTY" will not be indicated.
Informs that the life of a replaceable part such as fuser (fusing device)
and roller.
This is indicated in combination with other messages of the first line.
Normal operation is possible.
Indicates that the number of sheets in current printing when the number
of copies is two or more.
Deletes not-yet-printed data within the buffer and initiates the status of
the printer to user default.
Temporary DLL/ macro/ user pattern will be deleted.
READY
ATTENTION
READY
ATTENTION
READY
ATTENTION
READY
ATTENTION
READY
ATTENTION
READY
ATTENTION
TONER EMPTY
TONER SENSOR
CHANGE DRUM
FUSER LIFE
COPY nnn/mmm
RESET
Summary of Contents for OKIPAGE18
