14e Setup Guide
E-15
|
USB Interface
Requires a USB cable. The cable must meet USB Rev 1.1
specification for normal operation, and be UL/CM/CSA
approved.
!
OKI DATA has tested and approved the following USB
cable: Part Number 70037901. Cable Length: 10 ft.
(3.048 meters). See Service and Support in the User’s
Guide for purchasing information.
Connecting the Cable
Make sure the printer and computer are off.
1 Insert the printer end of the cable firmly into the proper
connector on the back of the printer. Fasten the cable to
the printer securely.
2 Connect the other end of the cable to the proper connector
on your computer. Fasten the cable securely to your
computer.
Turning on the Printer
1 Make sure the printer is off.
POWER
ON
OF
F
POWER
ON
OF
F
F
F
2 Plug the cord into the printer first, then into a grounded
outlet.
3 Turn the printer on. It takes about 10 seconds for the
printer to initialize and warm up, and for the Ready light
on the operator panel to turn on, indicating the printer is
ready to receive data.
Summary of Contents for OKIPAGE14e
Page 1: ...OKIPAGE 14e Setup Guide 59334301...
Page 28: ......
