manualshive.com logo in svg

Oki OKIPAGE 18, Quick Start Manual, Page: 44 / 44

Share
Download
Oki OKIPAGE 18 Quick Start Manual Download Page 44

Overview

E-44

|

Quick Start

No CD-ROM Drive?

The printer software is supplied on a CD. If you do not have a
CD-ROM drive, there are several options available to you:
· Visit the Okidata web site at 

http://www.okidata.com

and download the driver(s) of your choice

· Find someone who has a CD-ROM drive and make a set

of diskettes using the Create Diskettes utility on the CD
(these instructions assume D is your CD-ROM drive):
1 Insert the OKIPAGE 18 CD in the CD-ROM drive.

2 Windows 95/98/NT 4.0: Click Start on the Windows

taskbar, then select Run.
Windows 3.1x: Click File, then select Run.

3 Type D:\install.exe and click OK.

4 Wait for the OKI Menu Installer Setup window to

appear.

5 Click Help, Support and Information.

6 Click Create Diskettes and follow the on-screen

instructions.

· Request a set of diskettes: in the U.S. or Canada, call

1-888-232-8350; in Brazil, call 55-11-5589-1518; in Latin
America, call (525) 661-6860. Order the appropriate part
number:

OKIPAGE 18 Driver (PCL5e)

Operating System Order #
Windows 95/98 10518/0399
Windows 3.1x 10519/0399

Adobe PostScript Level 2 Driver

Operating System Order #
Macintosh 10520/0399

Summary of Contents for OKIPAGE 18













































Reviews:

No comments