Quick Start
|
E-17
2 Insert the connector; secure with the screws.
3 Attach to the computer and tighten the screws.
!
Be sure not to over-tighten the screws–this could damage
the screw posts on your computer.
4 Turn the printer and computer on.
!
For Serial Interface pin assignments, see Interface in the
Specifications section of the User’s Guide.
Cable Requirements
· Cable must be shielded with twisted pair conductors and
must be UL and CSA approved.
· Maximum length for serial cable is 6 feet (1.8 meters).
· Printer connector is Type 17LE-13250-27 (D4CC)
receptacle (25 pins).
Standard RS232-C Serial Menu Settings
Flow Control = DTR Hi
Baud Rate = 9600 Baud
Data Bits = 8 Bits
Parity = None
Min. Busy = 200 mSeconds
!
To change any of these settings, see Printer Menus in the
Printer Control section of the User’s Guide.