OKILAN 6020E PLUS INSTALLATION GUIDE
MICROSOFT WINDOWS NETWORK CONFIGURATION
9
M
ICROSOFT
W
INDOWS
N
ETWORK
C
ONFIGURATION
The following configuration procedures are designed for Windows
95/98/ME/2000/NT/XP/2003 Server operating systems.
1.
Insert the CD supplied with your print server, and then click
on Install Software.
2.
Select TCP/IP Management Utilities, and then click on Next.
3.
Select ExtendView, and then click on Install.
4.
Start the ExtendView utility by clicking on Start, Programs,
Okidata, and then ExtendView.
5.
When you get the Welcome screen, click on Next, choose any
name for your View Name, select Automatically create a view
with default settings, and then click on Finish.
6.
Double-click on the print server that you want to print to in
the list.
7.
If you are using TCP/IP (recommended for Windows printing)
and you do not have a DHCP server (see note below), you
will need to manually assign a valid IP Address (if you are not
sure what IP address is valid, ask your network
administrator), and click on OK.
NOTE
If you are using DHCP on your network, the print server may have
acquired valid IP settings at this point and no further configuration
is necessary. This might work well if your DHCP server allows the
print server to keep this address permanently, but in most cases,
you will want to use a static address outside the range reserved
for DHCP (see your DHCP server documentation for details).
When you configure your printer port, the print server will go to a
static IP address. To assign a static IP address, right-click on the
print server in the menu, and then select Configuration. On the
TCP/IP tab, under IP Address Resolution, select Set Permanent,
and assign a valid static IP address for your network. Click on OK
to save the new settings.
8.
Install the ExtendConnect IP Port Monitor by inserting the CD
supplied with your print server and clicking on Install
Software.
9.
Select ExtendNet Connect Windows Printing, click on Next,
click on ExtendNet Connect for TCP/IP, and then click on
