Oki OKIFAX 5950 User Manual Download Page 75

Page: 75 / 248

User’s Guide: English

Entering a PBX Dial Prefix

1 Press Menu/Exit to enter Menu.

2 Input speed access no. 50 (PBX Line), wait.

3 Press

to select ON or OFF setting, press Enter.

4 Press

until you reach Dial Prefix, press Enter*.

5 Input the digit(s) normally dialed to obtain an outside line

from the PBX, press Enter.

6 Press Menu/Exit to return to standby mode.

* Dial Prefix can also be accessed from the main menu by
entering its speed access code 52.

Remember that all outside telephone numbers
programmed into the machine must begin with the dial
prefix of the PBX.

Clearing the PBX Dial Prefix

1 Press Menu/Exit to enter Menu.

2 Input speed access no. 50 (PBX Line), wait.

3 Press

to select OFF setting, press Enter.

4 Press Menu/Exit to return to standby mode.

Summary of Contents for OKIFAX 5950

























































































































































































































































Search results

Summary of Contents for OKIFAX 5950

Reviews:

Brands by name

Popular brands

Oki OKIFAX 5950, User Manual

Search results

Summary of Contents for OKIFAX 5950

Reviews:

Brands by name

Popular brands