MSM7617 Evaluation Board
¡ Semiconductor
16
1. Set the evaluation board.
Set the COMMON MODE SW’s I/O Mode (IOM1, IOM0) to 2-channel parallel I/O mode
(IOM1,0 = 0,0).
Set JP1, JP2, JP3, and JP4 to PCM mode.
Set JP9, JP11, and JP12 to EXT mode.
Fix JP10 to SYNC1 mode and JP13 to X’tal mode.
2. Referring to the diagram, connect the equipment under test to the evaluation board.
Use wires as short as possible to connect the equipment under test to the evaluation board.
If the connecting lines are long, noise or other factors can cause malfunction.
3. Apply power and reset the test system, set the mode switches, and start evaluation.