MPS730b User’s Guide > 97
Paper
cannot be
fed.
Paper jam.
Multiple
pages are
fed.
Paper is
fed at an
angle.
Paper is
wrinkled.
Is the paper correctly
set?
Load the paper correctly. For
labels, transparencies or
envelopes, fan them well first
to allow air to enter between
each sheet before loading.
See pages 17, ff.
Is the paper damp?
Replace with paper from a new
ream.
Is the correct type of
paper used?
Load the correct type of paper.
See page 21.
Is the paper tray set
correctly?
Push the paper tray completely
into the printer.
Is the printer placed on
a flat location?
Place the printer on a stable
surface.
Are the paper tray
guides set in the correct
positions?
Set the length guide and right
width guide in the correct
positions.
See page 19.
Have you used any
picture papers?
Clean the feed roll.
See page 124.
Paper is fed in more
than 1 sheet at a time.
Remove the paper in the feed
tray, fan it, then load it again.
Replenish paper only when all
the sheets in the tray are used
up.
Symptom
Explanation
Action
Summary of Contents for MPS730b
Page 1: ...User s Guide 59102201 my okidata com MPS730b...
Page 26: ...MPS730b User s Guide 26 2 Remove the tray from the printer 3 If installed remove the lid...
Page 87: ...MPS730b User s Guide 87 4 Open and close cover A Doing this will clear the error message...
Page 90: ...MPS730b User s Guide 90 Paper Jams Inside Cover C Duplex Unit 1 Remove the rear tray C...
