MPS730b User’s Guide > 23
Configuring Custom Sizes
To print on custom size paper loaded in trays 1 to 4, you must
set the paper size on the control panel. U
se the Menu to set Auto-
Sense OFF and then set Custom Size for the intended tray.
You may also need to set it in the printer driver, depending on
the paper size.
See the description of Express Print for an easy way to
print on various Custom Sizes.
Caution!
When setting the paper size in the printer driver and control
panel, be sure to specify the same size as the actual paper
used.
Setting the wrong size for printing will cause printer
failure.
This is especially true if you configure a bigger size
when using a narrow width paper.
Note
To return to standard paper size settings, select [Auto]. The
printer will automatically detect the size and orientation of
the loaded paper.
Summary of Contents for MPS730b
Page 1: ...User s Guide 59102201 my okidata com MPS730b...
Page 26: ...MPS730b User s Guide 26 2 Remove the tray from the printer 3 If installed remove the lid...
Page 87: ...MPS730b User s Guide 87 4 Open and close cover A Doing this will clear the error message...
Page 90: ...MPS730b User s Guide 90 Paper Jams Inside Cover C Duplex Unit 1 Remove the rear tray C...
